🚪 Under-Door Draft Stopper | 93cm Seal
🚪 Under-Door Draft Stopper | 93cm Seal
Couldn't load pickup availability
Close The Gap Under The Door With A Soft Sliding Seal
A 93cm soft PVC and felt door-bottom stopper designed to help reduce drafts, dust and some sound transfer while keeping a tidy low-profile look.
Help Reduce Air Movement Around The Bottom Of The Door
The double-sided soft profile sits around the door bottom to help limit cold air, dust and some room-to-room sound transfer. It is not a fully airtight or soundproof barrier.
Draft Reduction
Helps limit noticeable air movement through compatible under-door gaps.
Felt Sound Damping
Soft felt can help reduce some sound passing through the open gap, but it does not soundproof a room.
Soft-Glide Profile
Designed to move with the door across compatible smooth floors when sized and fitted correctly.
Adhesive Installation
Foldable construction and self-adhesive backing allow installation without drilling.
Cover A Common Source Of Indoor Drafts
A correctly sized stopper can help reduce cold air entering below a door, although whole-room temperature also depends on windows, walls and ventilation.
Fit The Width So The Door Can Still Open Freely
Too much pressure against the floor can increase drag, so adjust the stopper to the actual door thickness and gap.
Designed For 3.5–5.5cm Door Thicknesses
The source lists an adjustable width of 3.5–5.5cm and door-gap compatibility of approximately 0.3–2.6cm.
Clean, Fit, Press & Let The Adhesive Set
Clean The Surface
Remove dust, grease and moisture from the door bottom and nearby contact areas.
Check Door Fit
Confirm the door thickness and under-door gap are within the supplier-listed ranges.
Apply Firmly
Press the adhesive areas along the full length instead of attaching only at a few points.
Allow Bonding Time
The source recommends waiting about 24 hours before frequent opening and closing.
Specifications
• 1 × Under-Door Draft Stopper
- Measure the door thickness and floor gap before ordering; fit depends on the actual door and floor profile.
- Install only on clean, dry and stable surfaces. Rough, peeling, damp or dusty surfaces can weaken adhesion.
- Allow the adhesive time to bond before repeated door movement; the source recommends about 24 hours.
- Check that the stopper does not prevent the door from opening, closing or latching safely.
- This product can help reduce drafts and some sound transfer but does not make a room airtight or soundproof.
Free Shipping Within The US
Verify The SPAINHO®️ Store Before Ordering
Please confirm the seller and store information before purchase.
Third-party products may differ in PVC softness, felt density, adhesive backing, dimensions, color, door-gap fit, packaging, quality or after-sales support.