📢📢BUY MORE GET MORE FREE⏰Flush Fit Wall Plate Spacer
📢📢BUY MORE GET MORE FREE⏰Flush Fit Wall Plate Spacer
Couldn't load pickup availability
🔧 ALIGN • SPACE • FASTEN • FINISH
Stop Letting a Recessed Outlet Ruin the Finished Look
A slim metal wall plate spacer designed to help reposition compatible switches and receptacles when uneven depth leaves the finished cover plate sitting recessed, crooked, or separated from the wall.
⚡ A Small Spacer Can Make a Big Difference in the Finish
When a compatible electrical device sits slightly too deep, the spacer provides an additional mounting surface behind the device to help bring the front assembly into better alignment with the finished wall.
📐 Helps Correct Recessed Device Depth
Designed for compatible switches and receptacles that sit slightly behind the finished wall surface and need additional spacing before the wall plate is reinstalled.
⬜ Cleaner Wall Plate Alignment
Better device positioning can help the finished cover plate sit flatter and more evenly against the surrounding wall.
🔩 Slim Metal Construction
The one-piece metal design creates a rigid spacing surface without adding a bulky plastic component behind the cover plate.
🧰 Useful for Repetitive Installation Work
Available in multiple pack quantities for individual repairs, renovation projects, maintenance work, and repeated installations.
👀 Fix the Alignment Behind the Plate
Instead of trying to hide an alignment problem with the cover plate, the spacer works behind the finished plate to help reposition a compatible receptacle or switch closer to the desired mounting plane.
🔧 Built for the Little Installation Problems You Notice at the End
RECESSED DEVICE
Helps add spacing where a compatible switch or receptacle sits too far behind the finished surface.
UNEVEN COVER PLATE
Better underlying alignment can help reduce the appearance of uneven gaps around the finished plate.
WOBBLY FINISH
Provides an additional rigid spacing surface where compatible mounting conditions allow it.
REPEATED ADJUSTMENT
A purpose-shaped spacer can simplify jobs where installers would otherwise spend time improvising alignment.
🔩 Simple One-Piece Metal Construction
The flat metal frame is shaped to sit around a compatible electrical device mounting area while leaving the center open for the receptacle or switch assembly.
💡 Metal Grade & Finish Matter
Supplier imagery describes the spacer as rust-resistant and water-resistant, but the supplied specification only confirms “Metal.” Specific alloy, coating, corrosion resistance, and environmental ratings should be verified before being advertised as guaranteed product properties.
🧰 Basic Installation Workflow
Shut Off the Circuit
Turn the appropriate breaker off and verify that the device is de-energized before removing the cover plate or loosening electrical hardware.
Remove the Wall Plate
Remove the existing cover plate and inspect the device, mounting screws, electrical box, and surrounding wall condition.
Position the Spacer
Place the spacer in the compatible mounting position shown in the product instructions, keeping wiring and electrical connections unobstructed.
Secure & Check Alignment
Refasten the compatible device without overtightening, then check that it is straight, stable, and positioned correctly.
Reinstall the Cover Plate
Fit the wall plate back into place and confirm that it sits properly without excessive gaps, stress, or distortion.
⚠️ An Alignment Spacer — Not an Electrical Box Repair
This accessory is intended only for compatible spacing and alignment applications. It should not be used to compensate for a broken electrical box, damaged mounting hardware, loose wiring, unsafe connections, or an installation that otherwise requires a different approved repair method.
🔍 Check Compatibility Before Installation
✓ Confirm the spacer dimensions fit your device and installation area
✓ Check mounting-hole and device-yoke alignment
✓ Make sure the cover plate can reinstall without interference
✓ Ensure the electrical box and mounting hardware are secure and undamaged
✓ Use only where this type of spacer is appropriate for the installation
📏 Check the Size Before You Order
The supplier dimension image lists the metal spacer at approximately 4.25 in high × 2.28 in wide. Compare these measurements with your existing device and wall plate setup before purchasing.
📦 Choose the Quantity for Your Project
Supplier-listed pack options:
5 PCS
Small repair jobs
10 PCS
Multiple outlets or switches
20 PCS
Renovation projects
50 PCS
Larger installation work
🧰 Keep a Few Ready for Finish Work
SIMPLE FORM
No complicated moving parts or adjustment mechanism.
THIN PROFILE
Designed to add spacing without creating a bulky visible component.
MULTI-PACK OPTIONS
Choose a quantity that matches anything from a small repair to a larger renovation.
CLEANER FINISH
Helps address alignment behind the wall plate instead of simply accepting an uneven finished appearance.
📋 Product Details
| Product Type | Metal Wall Plate Spacer / Alignment Shim |
| Material | Metal |
| Supplier-Image Height | Approx. 4.25 in |
| Supplier-Image Width | Approx. 2.28 in |
| Quantity Options | 5 / 10 / 20 / 50 Pieces |
| Package Includes | Selected Quantity × Wall Plate Spacers |
⚠️ Electrical Installation Safety
• Turn off the appropriate circuit breaker before removing a wall plate or loosening a switch or receptacle.
• Verify that the circuit is de-energized before touching electrical components.
• Never work on an energized device.
• Do not use the spacer if it interferes with wiring, terminals, grounding components, mounting screws, or the electrical box.
• Do not use this product to compensate for damaged electrical boxes, broken mounting points, overheated wiring, loose connections, or other unsafe conditions.
• Confirm that the final installation complies with the requirements applicable to your electrical system and location.
• If you are uncertain about compatibility or safe electrical installation, have the work performed or inspected by a qualified electrician.
• Metal edges may be sharp. Handle carefully and keep loose pieces away from children.
FIX THE ALIGNMENT BEHIND THE FINISH
🔧 Help Your Wall Plates Sit Cleaner & Flatter
Add controlled spacing behind compatible switches and receptacles and create a more finished-looking installation without bulky improvised shims.
👉 Choose 5, 10, 20 or 50 Pieces for Your Project
